For dentists placing Class II restorations, Palodent Plus is the new integrated sectional matrix system from DENTSPLY that delivers easy, predictable and accurate contacts using innovative component technology.
VOCO is proud to introduce GrandTEC®, a state-of-the-art resin-impregnated glass fiber strand designed specifically for clinical situations that demand the highest levels of stability and adhesive strength.
The trusted performance of Cavitron® systems – now with the ease of Tap-On™ Technology which activates scaling or air polishing with a single tap of the foot pedal, allowing the foot to rest during the procedure.
Learn how Estelite Sigma Quick enhances your restoration time, decreases composite inventory, and provides the best alternative for your patient.
Kulzer introduces Venus® Temp 2, a new temporary restorative material to offer outstanding flexural strength, durability and the same level of esthetics found in final restorations.
This module will introduce you to the innovative 3M™ ESPE™ Retraction Capsule and show how it offers a convenient and time-saving alternative to traditional gingival retraction methods such as retraction cords and other retraction pastes.
Coltène introduces new COMPONEER™, the first prefabricated composite veneer system that provides an affordable and reliable solution for the fabrication and placement of custom veneer restorations in a single office visit.
It is recommended to debond Clarity™ ADVANCED Ceramic Brackets on the archwire. However, single brackets may be debonded off the archwire. The Unitek™ Self-Ligating Bracket Debonding Instrument (REF 804-170) is recommended for debonding Clarity ADVANCED Ceramic Brackets, both on- and off the archwire, since it is specifically designed to maximize the ease of debonding. To debond, position the instrument over the bracket, firmly squeeze the bracket mesial-distal, to utilize the proprietary vertical stress concentrator, and gently rock the instrument back and forth, until the bracket is off the tooth.
It is recommended to debond Clarity™ ADVANCED Ceramic Brackets on the archwire. However, single brackets may be debonded off the archwire. The Unitek™ Self-Ligating Bracket Debonding Instrument (REF 804-170) is recommended for debonding Clarity ADVANCED Ceramic Brackets, both on- and off the archwire, since it is specifically designed to maximize the ease of debonding. To debond, position the instrument over the bracket, firmly squeeze the bracket mesial-distal, to utilize the proprietary vertical stress concentrator, and gently rock the instrument back and forth, until the bracket is off the tooth.
When it comes to filling a root canal—a tight 3-dimensional seal is essential to achieving long-term clinical success. Coltene now introduces GuttaFlow®2, which offers all the benefits of the original GuttaFlow® in a convenient syringe delivery system, plus the added advantage of easier drilling for post preparation and retreatment.
This module will highlight the features and benefits of Flexitime® VPS Impression Solutions, and show how this innovative and versatile impression material system allows dentists to capture precise detail for an accurate marginal fit—every time.
Tools: Hemostat/Mosquito pliers and ligature director with a small head
Ligature material: Sections of four modules of powerchain (not too thick; can use Rocky Mountain or Ormco)
When to use it: Use the reverse double overtie when you need maximum seating force on the wire.
Technique: Ligature is placed around the hook and the behind the occlusal wing before placing the wire. In contrast to a normal double overtie, the free modules are oriented to the occlusal. To overtie, seat the wire in the slot with a ligature director, stretch the elastic with the hemostat/mosquito pliers over the wire and fix the first module under the hook, using the ligature director to direct the powerchain. To remove the reverse double overtie, use a short dental explorer to pull the ligature from under the hook and remove.
Tools: Hemostat/Mosquito pliers and ligature director with a small head (optional)
Ligature material: Conventional o-ring
When to use it: When alignment is almost normal. This ligature will not provide tip control when used with the vertical slot.
Technique: Place o-ring behind the occlusal tie wing and over the gingival hook. When ligating lower anterior brackets, it is important to go occlusal to gingival when placing regular o-rings.
Tools: Hemostat/Mosquito pliers and ligature director
Ligature material: Multiple modules of clear powerchain
When to use it: To derotate and close spaces. The term “chicane” refers to an elastic that is placed on both the buccal and lingual sides of the teeth. It is a very helpful technique for simultaneously derotating teeth and closing space or derotating multiple teeth. The chicane is very versatile and can be used in a number of different clinical situations.
Tools: Hemostat/Mosquito pliers and ligature director
Ligature material: Clear powerchain
When to use it: When it is not possible to ligate a tooth but it needs to be brought closer to the wire.
Technique: Make a normal tie on the wire using the first module of the chain and then is stretch the second module around the crown of the tooth. The technique is especially helpful when the crowding is so severe that the bracket could not be bonded to the tooth.
The wings of Incognito brackets are large enough to accommodate both overties and powerchain. Powerchain is easily placed over the existing ties. Recommended powerchain is Rocky Mountain because it is thinner and easier to place on Incognito brackets.
Tools: Hemostat/Mosquito pliers, ligature director, short explorer
Ligature material: Four modules of RMO gray powerchain
When to use it: For angulation and torque control of the anterior teeth when using a ribbonwise archwire with a vertical insertion. The power tie can be used to correct torque and angulation problems with both full sized and under sized wires.
Technique: Remove old elastic and bring the last module of the four modules around the bracket body. It is not necessary to remove the wire to do this. Start to make a reverse double overtie and stretch the elastic as much as possible using a hemostat. Bring both parts of the open module around the side to which the tooth is tipped and go under the hook with both sides. When correcting a torque problem is does not matter which side of the tie wing you go around. Take the short probe and catch the first module. Place the tip of the probe on the occlusal tie wing. Slide the elastic behind the tie wing.
Tools: Ligature director, mirror
Ligature Material: None
When to use it: Use with .014 or smaller Niti wires to resolve crowding on lower anteriors.
Technique: Place wire behind the incisal tie wings and use ligature director to engage.
Tools: Needle nose hemostat and ligature director with a small head
Ligature material: Thin steel ligature 0.008” diameter and two inches in length
When to use it: Use this tie to prevent tipping when you are retracting canines or doing en-masse retraction. For maximum control, the wire needs to be guided close to the bracket body.
Technique: Make a u-shape under the hook on both sides of the bracket body going under the wire. Take one side, go over the wire and under the hook and close it on the opposite side by twisting. Push the sides of the steel ligature as close to the bracket body as possible and tighten to maximize the seating force.
Tools: Hemostat/Mosquito pliers with a thin head, cotton pliers, ligature director with a small head
Ligature material: Clear powerchain
When to use it: Derotation
Technique: Detrotate teeth by wrapping clear powerchain around the tooth, attaching to the wire and bracket hook.
Quick Up is an innovative and complete system that provides you with all the materials you need to quickly, easily and effectively attach corresponding attachments to an acrylic-based denture with the new Quick Up technique.
Wouldn’t it be nice to have the benefits of a glass ionomer restorative and resin-based composite in one restorative system? Well now you can! Watch this module on EQUIA™, by GC, and learn all about it!
*Not available in the US
This module will introduce you to new Grandio®SO Flow and Heavy Flow, and show how both products combine the easy handling you expect from a flowable with superior physical properties that—until now—were available only from packable universal composites.
iBOND Total Etch is an adhesive system based on the Total Etch technique. It not only leads the industry in high bond strength to both enamel and dentin, but also ensures optimal marginal adaptation and is ideal for desensitizing hypersensitive areas.
Gluma® Desensitizer PowerGel is a unique one-step gel formula that is specifically designed to give you all the desensitizing benefits of Gluma®—with greater control and accuracy during application.
BIOSPLINT is a multiple-use dental reinforcement ribbon that is ideal for stabilization and immobilization of loose teeth, immediate replacement of avulsed teeth, reinforcement and construction of provisional and permanent bridges, and the maintenance of inter-dental spaces.
Watch this module and learn all about this exceptional splinting material.
SOPROLIFE utilizes an auto-fluorescence technology under high magnification to assist dentists with the diagnosis and treatments of caries. By enabling dentists to see what was once invisible to the eye, SOPROLIFE is changing the way dental caries is diagnosed and treated.
This module will introduce you to Grandio®SO, a substrate-optimized universal nano-hybrid composite—and show how its unique combination of superior handling, aesthetics and ideal physical properties make it the most tooth-like composite ever developed.
GC America introduces new Fuji TEMP LT™ Glass Ionomer Provisional Luting Cement, the first provisional luting cement that provides versatility, reliability, durability and ease of use. Combining all the benefits of glass ionomer technology with high bond strength and ease of removal, Fuji TEMP LT™ is the perfect temporary cement for all your clinical cases.
Camille Luke discusses how to show your boss what you're worth through improving the vital signs of your hygiene department and get a raise.
Dr. Eric Block discusses the early signs of burnout that could lead to more serious issues in a dentist career.
Dr. Eric Block discusses combatting professional burnout as a dentist.
Mary Govoni discusses CSR Wraps and the Halyard wrap that is a actually 2-layered wrap, which is a huge efficiency in the dental office.
Dr. Lori Trost discusses using good quality single-use burs, from companies such as Microcopy, make all the difference during dental procedures.
Dr. Jose-Luis Ruiz discusses adhesive dentistry and his trust in bonding restorations with adhesives.
Dr. Joshua Austin discusses how all costs have been increasing except for reimbursements and how to work efficiently to be profitable in your practice.
Dr. Robert Convissar discusses how to screen for oral cancer by checking the lateral border of the tongue, the most common area in oral cavity for malignancy.
Dr. Stanley Malamed discusses the best place to train your staff in CPR is in your office and to train yearly.
Dr. Sarah Winter discusses how to get rid of those pesky white spot lesions by using resin infiltration with DMG's Icon.
Palodent® Plus Sectional Matrix System
